Introduction

The motor drives the main shaft and the turntable to rotate through the reducer, and the turntable drives dozens of annular rollers to roll and rotate in the grinding ring raceway by pins. The annular rollers are installed in multiple layers. The material is crushed into small particles by the hammer crusher and then transported to the storage bin by the elevator. The electromagnetic vibrating feeder evenly sends the material to the upper bulk tray. The material is scattered into the raceway of the grinding ring under the action of centrifugal force and is squeezed and ground by the annular grinding roller. The suction action of the high-pressure centrifugal fan sucks the outside air into the machine and brings the ground material into the classifier. The rotating turbine in the powder separator makes the coarse powder fall back for regrinding, and the fine powder enters the cyclone powder collector with the air flow and is discharged from the discharge valve at the bottom of the powder concentrator. After purification, the air is discharged through the fan and muffler.

Features

• Compared with jet mill, mixing grinder and ball mill of same finished product size and motor power, MW Micro-Powder Mill has double capacity and saves 30% energy.
• The product size can be adjusted between 325 mesh to 2500 mesh (47-5micron).
• The application of pulse dust collector and muffler greatly reduce dust pollution and noise.
• Forged by special material, the ring and roller can be used for about one year while grinding calcium carbonate.

Parameter

Spare Parts

Transport

The product equipment packing is wooden case, we will change the package accroding your demands, and delivery by ship, reilway, airplane or way accroding your requirement.

FAQ